60012 Pen Mill Trimmer set, 7pcs Professional Pen Turners Barrel Trimming System

Description

An essential step for making a quality pen project is to square the end of your pen blanks and pen tubes prior to final pen kit assembly. Now you have this precision trimming system that squares the end of the blank perfectly while removing excess glue from inside the pen tube that can interfere with assembly.
A Complete Barrel Trimming System
This kit includes the four most popular size trimmers 7mm, 8mm, 3/8" and 10mm pilot shaft, 3/4" square end cutter, Allen wrench & sleeve adapter. To meet the demands of the most discriminating pen maker.
Extreme Hard
These Pen Barrel Trimmers are made of solid carbon steel holds edge longer than standard barrel trimmers, offers superior cutting strength for maximum drilling outcomes.
What’s in box：
* 7mm, 8mm, 3/8", and 10mm pilot shafts
* 3/4" squaring cutter
* Allen wrench
* "0" Size shaft
* O Fits over 7mm Pilot to keep it centered
Notes:
1. If the drill bits required are not available or the hole in the wood is too large, use the next larger bit and wrap a strip of masking tape over the metal to fill up the space for a snug fit.
2. When trimming the ends of a blank with the barrel adhered inside, use minimal pressure and raise and lower the barrel trimmer frequently to prevent the trimmer from burning the end of the blank and darkening or discoloring the wood.
3. Hard, resinous woods, like those of the rosewood family, tend to burn easily if you trim too quickly. ·Trim for a second or less and back the trimmer out of the hole to check the depth of cut. Don’t drill too deeply and cut into the brass.